NVIDIA’s GeForce RTX 4060Ti and RTX 4060 should hit the market in May

The GeForce RTX 4060 Ti and RTX 4060 GPUs from NVIDIA are anticipated to go on sale in May of this year with an eye toward the mainstream market.

NVIDIA GeForce RTX 4060 Ti AD106 160W & RTX 4060 AD107 115W GPUs Reportedly Launching In May

The RTX 4070 is expected to go on sale on April 13 of next month, and the NVIDIA GeForce RTX 4060 Ti & RTX 4060 graphics cards based on the Ada GPU architecture are anticipated to follow. Our sources tell us that May is the target month for both GPUs in this full retail launch. Let’s begin with the Ti variant since we were able to obtain some additional information about the PCBs that these cards are built on.

NVIDIA GeForce RTX 4060 Ti Specifications – Rumored

According to earlier rumors, the NVIDIA GeForce RTX 4060 Ti should have 34 SMs or 4352 CUDA cores, an 8 GB GDDR6 memory running at 18 Gbps across a 128-bit bus interface, giving the card 288 GB/s of bandwidth, and the AD106-350-A1 GPU core, a scaled-down version of the full AD106 graphics chip. Additionally, the GPU has 32 MB of L2 cache, an 8x improvement over the GeForce RTX 3060 Ti.

It is anticipated that the PG190 SKU 361 PCB will power the graphics card. While the reference Founders Edition uses the traditional 16-Pin 12VHPWR connector, leaked PCB images showed that the custom models will be free to use either traditional 8-pin connectors or the more modern 16-pin plugs. In order to maximize the production value of their designs, AIBs should aim to use 8-pin connectors since we have been told that doing so will be significantly less expensive. TDP will be between 150 and 160W, which is roughly 25% less than the RTX 3060 Ti, the card’s forerunner.

NVIDIA GeForce RTX 4060 Specifications – Rumored

NVIDIA is anticipated to use the fully functional AD107-400-A1 GPU in the GeForce RTX 4060. Keep in mind that the GPU in the GeForce RTX 4060 laptop uses the same setup. The chip is anticipated to have 3072 CUDA cores and 8 GB of GDDR6 memory operating at 18 Gbps memory speeds over a 128-bit bus interface. As a result, the card’s bandwidth increases to 288 GB/s, and the total TDP for the card will be between 110W and 115W. There are also claims that the GPU has 24 MB of cache. (L2).

In comparison to the RTX 3060 12 GB, the TGP of the NVIDIA GeForce RTX 4060 should be 35% lower. Our information suggests the card would use the PG173 SKU 371 PCB design, contrary to earlier rumours that suggested it would use a PG190 PCB. Most likely, the reference AIC boards use the PG173 variant while the FE uses the PG190 variant. The Non-Ti variant, like the RTX 4060 Ti, will primarily rely on the industry-standard 8-pin connectors, and we will also get some nice Mini-ITX variants of the card, resulting in some incredibly effective gaming PCs.

The NVIDIA GeForce RTX 4060 Ti should provide about 22 TFLOPs of compute performance, with AIB models boosting it close to 24 TFLOPs, based on the rumoured reference boost frequency of up to 2535 MHz.

According to the aforementioned data, it appears that the performance of the NVIDIA GeForce RTX 4060 Ti graphics card will be comparable to that of the GeForce RTX 3070 Ti. In order for the 4060 Ti to be a worthy replacement for the 3060 Ti, which also had the same MSRP, the 3070 Ti had to be priced close to $599 US at launch. The primary problem is that, while the card might perform admirably at 1080p, greater resolutions would be difficult for it to handle because of its meagre 128-bit bus interface and reliance on slower G6 memory rather than faster G6X. The card would be a very effective design in the 150W TDP range, but the rest won’t be known until the card is officially released and reviews start to appear.

GeForce RTX 40 Series Specs

News source: wccftech.com